High-Brightness Digital Light Source Controller
The interface, size, output power, and other features of the product can be customized flexibly.
You are welcome to contact!
CHARACTERISTICS
| Shell material | Steel Plate |
| Shell color | Black |
| Dimensions | 120*350*180(H*L*W) |
| Weight | 800g |
| Cooling method | Air cooling |
| Number of channels | 4 |
| Input voltage | AC100-240V （50/60Hz） |
| The output voltage | 5V-25V ( Depends on load ) |
| Output Power | 350W (75W, 150W, 550W, 750W are availabe) |
| communication method | 100M network port |
| Short circuit protection | Yes |
| Overcurrent protection | Yes |
| Drive mode | Constant current |
| Trigger mode | Edge triggering |
| Single channel maximum current | 3A (1A, 1.5A, 2A are availabe) |
| Single channel rated power | 75W |
| control precision | 10us(The minimum unit of the host computer is 10us, for example: input 2, the actual content is 20us) |
| internal trigger | Yes (Host computer settings) |
| response delay | 0.3us / less than 5us (Hardware inherent latency) |
| Minimum / Maximum lighting time | 10us-200us |
| Trigger frequency | Less than 3KHz |
| Linkage mode | Multi-channel linkage(It is necessary to add a second tube when wiring) |
| PWM mode | Triggered multiple times during validity period(Work according to the timing sequence of lighting delay + lighting time) |
| Operating temperature and humidity | Temperature: 0～30℃, Humidity: 20～85%RH (non-condensing) |
| Storage temperature and humidity | Temperature: -20～60℃, Humidity: 20～85%RH (non-condensing) |
DESCRIPTION
- The constant current digital controller has 256 levels of adjustment, 100M Ethernet communication, trigger timing can be set to external trigger, external trigger input, screw installation or DIN rail installation, minimum adjustment unit 10us, channel independent input and output.
- The output power is stable and can be connected to an external 220V universal AC power supply. The external trigger is flexible, and positive and negative triggers can be selected by yourself.
- The constant current digital controller can automatically detect the load, and it integrates constant light and stroboscopic light.
It supports digital display, 256 levels of brightness can be set, and can be controlled remotely by host computer software through the ETH interface
Installation method: screw installation or DIN rail installation.
The external trigger input adopts a high-speed opto-coupler design, which is fast and reliable. - Connection steps:
Connect to power
Make sure the green light is flashing (program) is valid. If only the red light is always on (for digital controllers), the program is lost.
Open the host computer software, confirm the IP address of the controller, and make sure it is in the same local area network as the local host.
Refer to the user manual to set relevant channel parameters (correct parameters to prevent lamp burning)
Plug in the light source, external trigger input or software trigger.
