DESCRIPTION

• Used with 4 light sources, the brightness of the light source can be increased by 3 times or more. The digital display makes it easy to confirm the set value.
  Installation method: screw installation or DIN rail installation.
  The external trigger input adopts high speed opto-coupler design, which is fast and reliable.
• Multiple light sources combinations for different defects at the same position, sequentially stroboscopicaly switching imaging;
  Image extraction processing to obtain respective images of multiple combinations of light sources;
  Analyze the defects under different images;
  The solution can save cameras, work stations, and more light path possibilities;
  100M network port communication;
  Internal integrated trigger;
  Using internal signals or external signals, up to four light sources can be switched and six cameras can be switched;
  The lighting time of the light source is less than 0.1us;
  The light source lighting time control accuracy is 1us;
  Support; set data to be saved when power is off;
• Application: During the defect detection process, sometimes a combination of multiple light sources is needed to clearly capture a certain defect with the camera. Moreover, detecting multiple defects at the same station often requires cooperation with motion control, which requires many round trips. Second-rate. This increases the overall detection time and affects efficiency. Combined light switching technology can not only realize the free combination and distribution of light sources, but also realize high-speed switching between different groups, greatly improving efficiency and saving cost and time.