Point Light / Spot Light
The wavelength, dimensions, luminous intensity and other features can be customized for you. Welcome to contact!
EXAMPLES OF FEATURES AND PARAMETERS
| Led color | White (Green, blue, red, infrared and ultraviolet are also available ) |
| Wave Length / Color Temperature | 6500±500K |
| Current (5±%) | 1.3 A max |
| Power (5±%) | 4.6 W max |
| Illuminance（WD：0mm） | > 1000000 Lux |
| Input voltage | DC 3.5V |
| Weight | 0.034 kg (10±%) |
| Cable length | 500mm (+0mm, -35mm) |
| Operating environment | Temperature: 0 ~ 40 ℃ , Humidity 20 ~ 85% RH (non-condensing |
Model
| Model | Color | Outlet Diameter | Power |
| HS-PO-08-R | R | 8mm | DC 5V, 3W |
| HS-PO-08-G | G | 8mm | DC 5V, 3W |
| HS-PO-08-B | B | 8mm | DC 5V, 3W |
| HS-PO-08-W | W | 8mm | DC 5V, 3W |
| HS-PO-08-IR | IR | 8mm | DC 5V, 1.5W |
| HS-PO-08-UV | UV | 8mm | DC 5V, 3W |
| HS-PO-12-R | R | 12mm | DC 5V, 5/10W |
| HS-PO-12-G | G | 12mm | DC 5V, 5/10W |
| HS-PO-12-B | B | 12mm | DC 5V, 5/10W |
| HS-PO-12-W | W | 12mm | DC 5V, 5/10W |
| HS-PO-12-IR | IR | 12mm | DC 5V, 3/5W |
| HS-PO-12-UV | UV | 12mm | DC 5V, 5W |
DESCRIPTION AND APPLICATION SCENARIOS
-
- Suitable for chip detection, mark point positioning, diamond wire saw inspection, and LCD glass line detection.
- The point light uses the high-power led which has high luminous intensity, if choose the white light, the illumination can be up to 2 million lux when the working distance is less than 20mm.
-
- The point light can achieve high-brightness lighting in a small area and saves space, can be used with a telephoto lens to achieve long-distance lighting in places where there is no space for installation, and if combined with a microscope or telecentric lens, it can also be used as a parallel or coaxial light source.
-
- The point light has an efficient heat dissipation design, can replace conventional halogen lamps and has a longer service life.
-
- When the light source works normally, it is glare of strong light so please do not look directly at the luminous area; it is recommended to use the light source controller produced by our company to control the switch and brightness of the light source through an external trigger or the internal software ; this is conducive to improving service life and brightness stability of the light source.
